Ac blast Know the things that should be taken care of to prevent the AC from bursting


The scorching heat across the country has made life difficult for people. In this scorching heat, people have the support of AC, coolers and fans. Recently, there have been reports of AC blasts due to the heat. Recently, a couple sleeping in a room in Jaipur died due to the bursting of an AC. In such a scorching heat, the only support for people is the AC. So should you stop using AC due to these incidents? This is not the case at all, today we are going to tell you some precautions and methods by which you can save your AC from bursting.

Check these things daily

1- Is the AC mode working properly or not?

2-Is the AC wire expanding due to heat?

3- If the temperature of the AC compressor seems high, turn off the AC immediately

3- Any strange sound coming from the AC can cause trouble.

4- If the amount of water coming out of the AC is decreasing then there may be a problem

Run AC at this temperature

Although AC is becoming a necessity for the home. But many people are careless, due to which the risk of explosion in AC increases. In such a situation, we are going to tell you which mistakes of yours can cause AC to explode. You should set the temperature of AC very thoughtfully because it directly affects the performance of AC. Many times due to excessive cooling, we reduce the temperature, which increases the pressure on the compressor. You may get more cooling from this, but the risk will always be with you. When the pressure on the compressor increases, more heat will also come out from the outdoor. According to the Ministry of Energy, you should not run AC below 24 degrees Celsius.

Take care of these things and keep checking these things

AC should never be run for a long time, running it for a long time puts pressure on the AC compressor and it starts heating up due to heat, which increases the chances of it bursting. In such a situation, keep getting the AC serviced from time to time so that you will be aware of the problems in it. Always run the AC at a temperature of 24 or above, which will reduce the load on the compressor. Remember to take out the wires of the AC from a place where there is almost no smoke and heat. There is a possibility of short circuit due to melting of wires in extreme heat, due to which the AC can catch fire. Therefore, you should keep the wires of the AC covered with anti-fire cover so that the risk of fire in them is reduced. Apart from this, if the AC is blowing air intermittently, then this is also a sign of a bad compressor, if any such problem is seen, then immediately inform the service center. You should keep taking information from the caretaker for the maintenance of the AC from time to time. Turn on the AC half an hour before sleeping and run it only between 24 to 28 temperature. You should also check the mode system of the AC frequently, the non-functioning of the mode can also cause problems in the compressor. AC contains Freon gas which cools the air, during service keep checking its leakage and its quantity.

Running the AC for a long time also proves to be very dangerous. By running it for a long time, its load increases and its parts become very hot, which increases the risk of explosion in the AC. In such a situation, it is important to run the AC in a normal way and turn it off when not needed.

Also read: Which is more beneficial, normal AC or inverter AC, know these things before buying



Source link

onlinenews24seven: