train accidents, especially derailment, These are a major challenge not only for passengers and goods but also for railway operations., when a train derails, So a complex and skilled operation is required to get it back on track., Many factors are involved in this process, such as severity of derailment, length and weight of train, Weather conditions and available resources, In such a situation, let us know that if a train gets derailed then how its coaches are put back on the track.,
Also read: How many ships has the Bermuda Triangle swallowed so far, has any wreckage been found?
derailment Of after What Would Is,
After derailment, the first rescue operation is started, the injured are evacuated, The dead are recovered and all necessary steps are taken to minimize the danger., After this the investigation into the reasons for derailment begins. This investigation can be done by the Commissioner of Railway Safety or other concerned agencies. Then once the area is safe, So the work of removing the derailed coaches from the track begins.
Also read: Not black or red but this used to be the real color of Coca Cola, you will not believe after knowing
How is a train coach put back on track after derailment?,
Many methods are adopted to get the coaches back on track.,
crane Of Use, This is one of the most common methods. The derailed coach is lifted and placed back on track using a large crane.,
hydraulic jack, Lower the coach using hydraulic jack.,is slowly lifted and then placed on the track,
leveling jack, The coach is leveled using leveling jacks and then it is pushed onto the track.,
Train Of Use, Sometimes,Sometimes another train is used to pull the derailed coach back onto the track.,
air bags, in some cases, The coach is lifted using air bags and then placed on the track,
These problems arise
Many problems arise while putting the coaches on track., For example, after derailment, it is necessary to remove the coaches from the tracks as soon as possible so that the railway line can be restarted., Apart from this, it is very important to take care of safety in this process., Also this work requires special equipment and trained personnel and bad weather can make the process more difficult,
Also read: What is the speed of the bullet after firing from a revolver, can one escape by running away?
