Water Heater Rod Using Tips: Winter has arrived in India. Now fog has started occurring along with cold winds in the morning and evening. The temperature is also coming down day by day. Due to winter, the water in the tanks kept on the roof also becomes quite cold. And because of this, bathing with cold water becomes a big challenge. Apart from this, there is a lot of difficulty in washing utensils during winter season.
That is why many people install geysers in their homes. So many people use water heaters Emerson Road in their homes. Installing a geyser is more expensive than purchasing an immersion rod. That’s why most people use an immersion rod to heat water. If you also make hot water using immersion rod. So it is important for you to keep some things in mind while using it. Otherwise an accident may occur.
Use only in plastic bucket
In winter season, when you use hot water using immersion rod. So always keep in mind that you are heating water in a plastic bucket. Heating water in an iron bucket is not free from danger. Because we will heat water in an iron bucket. So there is a danger of electric shock spreading due to this.
There is also a risk of current leakage due to this. So that’s when the water gets hot. The bucket also gets hot. In such a situation you cannot even lift it. That is why it is better that whenever you heat water using water heater immersion rod. So always do it in a plastic bucket.
Switch on only after putting the rod in water
When you heat water with an immersion rod. So first fill the bucket with water. After that insert the immersion rod in it. Then turn on the switch. Do not touch the bucket at all after switching on. If you feel that there is less water in the bucket. So do not add water in between. In such a situation you may get electrocuted. But if more water needs to be added to the bucket. So first turn off the switch and unplug it. Then add water and then plug again and switch on.
